Wood Borer Pest Control in Chembur

Fine powder under the cupboard? Check these

The insect is a small beetle. It lays its eggs in a crack in the wood, and the larvae, the woodworms, eat tunnels through it for months before they come out through the round holes you see. By the time the powder appears, the inside has been eaten for a while.

• Tiny round holes in a cupboard, a bed, a chair, a photo frame or the flooring.
• A small heap of fine, flour-like powder under the piece that comes back after you wipe it.
• Wood that feels soft or crumbles at an edge or a corner.
• A faint ticking from inside a piece of furniture in a quiet room at night.

How the wood is treated

Treatment starts at ₹2,800, the inspection and the written quote are free, and inside the 1-year warranty you get 3 free follow-up visits a year. Clothes and papers in the same cupboard can also be eaten by silverfish, which the technician will check for.

• Furniture

  Cupboards, beds, chairs, tables and old pieces. The product is injected into the holes and sprayed over the surface with a quick-drying formula that does not mark the polish.

• Fixed wood

  Door and window frames, beams and flooring get a deeper treatment, which takes longer and may mean moving furniture away from the wall first.

• Not yet affected

  A valuable piece standing next to an infested one can be treated in advance so it does not catch it.

Photos: Wood Borer Pest Control in Chembur

• How much does wood borer treatment cost in Chembur?

  It starts at ₹2,800 and depends on how many pieces are affected and whether fixed wood such as a door frame or the flooring is involved. One cupboard is near the starting price. The inspection is free, and photos of the holes and the powder sent on WhatsApp to 80979 41077 help the technician plan the visit.

• Can old furniture with borer holes be saved?

  Usually, yes, as long as the wood is still firm underneath. Old and new pieces are treated the same way, by injecting the holes and spraying the surface. If a piece has gone soft right through, the technician says so, because keeping it only spreads the beetle to the pieces standing next to it.

• How do I tell wood borer from termite damage?

  Borers leave tiny round holes and fine flour-like powder, and they usually attack one piece of furniture at a time. Termites leave a mud line up the wall, hollow wood and no powder, and they come through walls or up from the soil. Show the technician both the holes and the powder, and the treatment follows from that.

• Will the treatment spoil the polish?

  It should not. The product is injected into the holes and the surface spray is a quick-drying formula made for finished wood. If a piece has a delicate polish or is an old family piece, point it out at the inspection, and the technician tests a hidden spot before doing the whole surface.

• Should I move the affected piece away from the others?

  Yes, if you can do it safely, because the beetle spreads to nearby wood. Do not move it to another flat, to a relative's house or into storage, because that takes the problem with it. Vacuum up the powder, leave the holes as they are and book the inspection. The holes tell the technician where to inject.

• Can a new modular kitchen get wood borer?

  Yes, though it is less common. Infested plywood or timber can be used by mistake, and the beetle can also move in from an older piece standing nearby. Keep a pinch of the powder, photograph the holes and contact your carpenter too, because the fitting may carry its own warranty. The treatment is the same.

• How do I get rid of wood borers in furniture?

  The holes are injected and the surface sprayed, and a piece standing next to it can be treated in advance. Home remedies such as oil, vinegar or baking soda do not reach the larvae inside the wood. Vacuum the powder first, because fresh powder shows where the beetle is still active and where to inject.

• Can wood borers spread to other furniture?

  Yes. The adult beetle flies to the next piece of wood and lays its eggs in a crack there, so one cupboard becomes three if it is left. Check the pieces near the affected one and the door frame beside it, and ask the technician to look at all of them during the free inspection.

• How do I stop wood borer coming back?

  Keep the room dry, look at wooden pieces now and then for fresh powder, and use treated wood for any new work. Inside the 1-year warranty you get 3 free follow-up visits a year, and the follow-up is a good moment to have any new hole checked before it becomes a new problem.

• Do you treat door frames and flooring as well as furniture?

  Yes. Door and window frames, beams and wooden flooring get a deeper treatment than a cupboard, because the wood is thicker and fixed in place. It takes longer and may mean moving furniture away from the wall for the visit. The technician tells you what is involved after seeing it, and the quote is written before work starts.